COOLGREENPMX005

Add to cart
  • Description
  • More

Penrite 7 Year Premix Coolant 5L

7 YEAR 450,000 KM Green Coolant Premix is a GENUINE GLYSANTIN G48, Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved, Type "A" Ethylene glycol, Anti-Freeze Anti-Boil as used in initial manufacturer factory fills. It uses a technically advanced HYBRID (HOAT - Hybrid Organic Acid Technology) based inhibitor system that is Phosphate, Amine and Nitrite free. The extended long life inhibitor formulation prevents rust, corrosion, cavitation and degradation of the cooling system. It is available in both concentrate and premix formulations.

7 Year 450,000 KM Green Coolant Premix is mixed at a 50% concentration level as per initial manufacturer requirements.

7 YEAR 450,000KM GREEN PREMIX Replaces 4 YEAR ANTI FREEZE ANTI BOIL PREMIX and HD AF/AB 50/50 PREMIX

7 YEAR 450,000 KM Green Coolant Premix is suitable for the cooling systems of petrol, LPG, light and heavy duty diesel and industrial engines where Hybrid (HOAT) type anti-freeze / anti-boil and anti-corrosion properties are required.

7 YEAR 450,000 KM Green Coolant Premix is suitable for passenger cars, 4WD's, motorcycles, light & heavy duty commercial vehicles, construction and agricultural equipment. It is especially suited to vehicles of European origin such as Audi / VW (G11), BMW, Mercedes, Porsche (Pre-1995), Volvo, Opel & Saab, but it may be used in all types of vehicles.

7 YEAR 450,000 KM Green Coolant Premixprovides long-term protection against rust and corrosion for all materials used in the engine and in the cooling system construction. It protects cast iron, aluminium, copper and solder alloys as well as the hoses, seals and plastics used for the cooling system construction. It is effective in all cast iron aluminium engines that are under load or used in extreme hot and cold climates.

7 YEAR 450,000 KM Green Coolant Premix may be used in all types of vehicles that use green, blue or yellow coloured initial fill coolants and it is also suitable for use in out of warranty service to maintain OEM performance. It is also ideal for motorcycles.

7 YEAR 450,000 KM Green Coolant Premix is a 50% concentration formulation and is ready to use directly from the container. It is pre-mixed with de-mineralised water and can be poured directly into the cooling system. No further dilution is required. It can be used as a complete service refill, top up or is safe to mix with compatible Type A coolant. Penrite recommend that a 50% concentration level should be maintained for maximum, performance and longevity of the coolant and protection of the cooling system.

Note: Penrite recommend flushing the cooling system prior to a complete service refill. Penrite Radiator Flush effectively cleans the system in 7 minutes and prepares the cooling system for new coolant.

Dose Rate - Freezing Point Boiling Point

 

Penrite recommend mixing at the manufacturers recommended concentration levels.

Product Benefits
  • OEM Approved to maintain manufacturer’s warranty & specifications
  • 7 Year 450,000km drain intervals if used and maintained at 50%.
  • Protects all internal surfaces from corrosion
  • Phosphate free formulation allows hard water use
  • Nitrite and amine free
OEM Approvals
  • Audi TL 774-C (G11)
  • Bentley TL 774-C (G11)
  • BMW N 600 69.0
  • Deutz H-LV 0161 0188
  • Jenbacher TA-Nr. 1000-0201
  • Jaguar VIN 878388 (Built to 1999)
  • Lamborghini TL 774-C (G11)
  • Liebherr TLV 035
  • TLV 23009 A
  • MAN 324 NF
  • MAN B&W List 3.3.7
  • Maybach Specification 325.0
  • Mini (BMW) BMW N 600 69.0
  • M/Benz Specification 325.0
  • MTU MTL 5048
  • Opel B 040 0240
  • Porsche (pre 1995)
  • Rolls Royce (post 1998)
  • BMW N 600 69.0
  • Saab 690 1599
  • Seat TL 774-C (G11)
  • Skoda TL 774-C (G11)
  • Smart Specification 325.0
  • esla (Vehicles built from 2013)
  • Van Hool
  • Volvo Car 1286083 Issue 002
  • Volvo Truck (pre 2005)
  • Zastava
Key Specifications:
  • AS 2108-2004 Type A
  • ASTM D3306 BS 6580
  • Cummins 85T8-2/CESMG03
  • Chrysler MS-9769
  • Deutz AG 0199-99-1115
  • Federal Standard O-A-548D
  • Ford M97B44-A/M97B51-A1
  • GM 1825M/1899M
  • Holden HN2217/HN2043
  • JIS K2234 (Japan)
  • JASO M325 (Japan)
  • JI Case JIC 501
  • JCB STD 0088
  • John Deere JDM H24
  • KSM 2142 (Korea)
  • Leyland BLS.22.AF.01
  • Opel QL 13D100
  • Mercedes MB326.0 (Premix 50% Only)
  • Rover BLS.22.AF.01
  • SAE J1034
Suitable for the following Vehicles

 

Heavy Duty
Typical Data